Product ID:7302H VINYL POLYSILOXANE IMPRESSION CATALYS
MSDS Date:02/23/1989
FSC:6520
NIIN:01-217-4341
MSDS Number: BLFHP

MINNESOTA MINING & MFG CO HEALTH CARE PRODUCTS DIV

3M CENTER, BLDG 225-58-01
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-5454

Info Phone: 612-733-0131

Cage: 28156

MINNESOTA MINING AND MFG CO HEALTH CARE SERVICES DIV

ST PAUL, MN 55144-1000 US

Telephone: 800-854-0631

Cage: 28156

SILOXANES & SILICONES, DI-METHYLVINYL GROUP TERMINATED

CAS: 68083-19-2

Fraction By Weight: 40-50%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 50-60%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

CATALYST HYDROPHILIC AGENT

Fraction By Weight: <1%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DIRECT EYE CONTACT WITH UNCURED
MATERIAL MAY CAUSE MINOR EYE IRRITATION. POLYMERIZED PASTES ARE
NON-IRRITATING TO SKIN. IN THE FORM OF THIS PRODUCT, EXPOSURE BY
INHALATION IS UNLIKELY. POLYMERIZED PAS TE ARE NON-IRRITATING BY
INGESTION, CONSIDERED AS PRACTICALLY NON-TOXIC ORALLY.
Explanation of Carcinogenicity:INHALATION OF CRYSTALLINE SILICON
DIOXIDE HAS BEEN SHOWN TO PRODUCE SILICOSIS IN HUMANS, WHICH IS
UNLIKELY IN THIS FORM.
Effects of Overexposure:DIRECT EYE CONTACT WITH UNCURED MATERIAL MAY
CAUSE MINOR EYE IRRITATION. POLYMERIZED PASTES ARE NON-IRRITATING
TO SKIN. IN THE FORM OF THIS PRODUCT, EXPOSURE BY INHALATION IS
UNLIKELY. POLYMERIZED PAS TE ARE NON-IRRITATING BY INGESTION,
CONSIDERED AS PRACTICALLY NON-TOXIC ORALLY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IN CASE OF EYE CONTACT WITH UNCURED MATERIALS, FLUSH
WITH RUNNING WATER FOR 15 MINUTES WHILE HOLDING EYELIDS OPEN. GET
MEDICAL ATTENTION IMMEDIATELY.

Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, OR DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:INDIVIDUAL CONTAINERS: WIPE UP AREA WITH
ABSORBENT MATERIAL. CASE QUANTITIES: CONTAIN AREA OF SPILL, COLLECT
MATERIAL. WIPE UP RESIDUE WITH ABSORBENT MATERIAL. PLACE IN METAL
CONTAINER.
Neutralizing Agent:MIX CATALYST AND BASE PARTS TOGETHER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
EXPRESS VINYL POLYSILOXANE HYDROPHILIC IMPRESSION MATERIAL, LIGHT BODY
- REGULAR SET #7302H

HCC:N1
Spec Gravity:1.5
Viscosity:60000-80000CP
Evaporation Rate & Reference:0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLUE AND GREEN COLOR, VISCOUS LIQUIDS, NO ODOR

Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:NONE

Waste Disposal Methods:INDIVIDUAL CONTAINERS: DISPOSE OF AS ORDINARY
WASTE IN ACCORDANCE WITH LOCAL REGULATIONS. CASE QUANTITIES: MIX
CATALYST AND BASE PARTS TOGETHER. WHEN FULLY CURED, DISPOSE OF IN
SANITARY LANDFILL. CONS ULT REGULATIONS OR AUTHORITIES BEFORE
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.